Name: 2 Inch Roloc Abrasive Disc
Brand: Wenling Keying Abrasives Co., Ltd.

2 Inch Roloc Abrasive Disc

KEYING manufactures Roloc Abrasive Disc, our production is about reprocessing jumbo rolls of SCM, then finally changing into unique smaller sizes SCM grinding and polishing tools. 2 flap disc is adaptable to contours; the performance capacity is excellent and steady.

 Contact us

Call us +8615067699991

Specifications Of 2 Inch Roloc Abrasive Disc

Size	2” （50mm)	Brand	Keying	Code
Backing	Roloc	Origin	Made in China	Grain Type	Aluminia Oxide/Silicon Carbide/ zirconia/Ceramic
Maximum RPM	7600	Minimium Order Quantity	10000pcs	Compatible Tool	Flexible shaft drives Straight grinders Angle grinders Cordless angle grinders
Hole Pattern	No holes	Standard of Packing	100pcs

Features Of 2 Inch Roloc Abrasive Disc

Excellent and consistent finish over a long period of time
Suitable for general use in dry and wet sanding applications
Low-stretch belt
More durable so more resistant on edges
Much less smearing tendency than existing products; especially at the edge of the disc when working at tight angle

Advantages

"Excellent performance on hard materials.

More durable so more resistant on edges.

Considerably more resistant to smearing than existing products

Excellent and consistent finish over a long period of time

Suitable for general use in dry and wet sanding applications

Low-stretch belt"

2 Inch Roloc Abrasive Disc Applicable Industries

Applications

Removal of rust, corrosion stains, scale, dirt, and paints.
Cleaning of weld seams
Removal of slight drawing marks and heat discolorations
Cleaning of surfaces of diverse characteristics
Clean Stainless steel surface in preparation of adhesive bonding or application of fillers.

2 Inch Roloc Abrasive Disc Applicable Industries

Recommendations For Use

Preferably for use on slow-running angle grinders.
For the best results, use at a recommended cutting speed of 30–35 m/s.

Matching Tool Drives

Flexible shaft drive
Power drill
Straight grinder

Safety Instructions of 2 Inch Roloc Abrasive Disc

Instructions:

Please try to choose an operation indoors environment and wear protective guards and goggles.
Never exceed the recommended maximum permitted rotational speed for safety reasons.
In order to have a good stock removal rate, quality of surface, and thermal laoding on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.

Safety Warning:

The clamping length between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.