Name: 4 Inch (100mm) Paint & Striper With Fibre Backing
Brand: Wenling Keying Abrasives Co., Ltd.

4 Inch (100mm) Paint & Striper With Fibre Backing

4 Inch Paint & Striper With Fibre Backing-图1.jpg

4 Inch Paint & Striper With Fibre Backing-图2.jpg

4 Inch Paint & Striper With Fibre Backing-图3.jpg

4 Inch Paint & Striper With Fibre Backing-图4.jpg

KEYING Paint & Striper Disc with Fibre Backing uses fiber mesh as the carrier and uses resin elastomer to firmly attach sharp abrasives to the fiber mesh. When polishing this product at high speed, the abrasive sand will not fall off and has a long service life. It can be used to polish the surfaces of steel, plastic, new fiber products, stone, concrete and so on.

 Contact us

Call us +8615067699991

Specifications Of 4 Inch Paint & Striper With Fibre Backing

Size	4” （100mm)	Brand	Keying	Code	HGHG00110016+Grit+S
Backing	Fibre	Origin	Made in China	Grain Type	Aluminia Oxide/Silicon Carbide
Maximum RPM	10000	Minimium Order Quantity	10000pcs	Compatible Tool	Flexible shaft drives Straight grinders Angle grinders Cordless angle grinders
Hole Pattern	One holes/ Fibre Glass	Standard of Packing	100pcs

Table Of 4 Inch Paint & Striper With Fibre Backing

Table of 4 Inch Paint & Striper With Fibre Backing

Note: Table for Paint Striper Disc OEM

4" as example, other sizes please contact sales beibei.liu@kytools.cn

Features Of 4 Inch Paint & Striper With Fibre Backing

Multi-use abrasive works on metal, wood, fiberboard and plastics.
Flexible non-woven nylon fiber disc will not rust or splinter.
Coarse silicon carbide abrasive cuts fast to save time.

4 Inch Paint & Striper With Fibre Backing Applicable Industries

Advantages

Low clogging
Excellent performance and lifetime
Hard-wearing, low grinding noise.
Fast to remove the paint or rust without damaging the original surface.
Durable in use.
Uniform grinding force

4 Inch Paint & Striper With Fibre Backing Applicable Industries

Pratical Applications

Removal of rust, corrosion stains, scale, dirt, paints.
Cleaning of weld seams
Removal of slight drawing marks and heat discolorations
Cleaning of surfaces of diverse characteristics
Clean Stainless steel surface in preparation of adhesive
Bonding or application of fillers.

Recommendations for use

It is advisable to use on angle grinders with a low rotational speed.
To achieve the optimal outcomes, utilize it at a suggested cutting speed ranging from 30 - 35 m/s.

Safety Instructions 4 Inch Paint & Striper With Fibre Backing

Instructions:

safety-instructions-4-inch-paint-&-striper-with-fibre-backing.png

Please try to choose an operation indoor environment and wear protective guards and goggles.
Never exceed the recommended maximum permitted rotational speed for safety reasons.
In order to have a good stock removal rate, quality of surface, and thermal laoding on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.

Safety Warning:

The clamping length between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.