Name: 4 Inch (100mm) Roloc Disc
Brand: Wenling Keying Abrasives Co., Ltd.

4 Inch (100mm) Roloc Disc

KEYING Roloc Disc product range offers an extensive variety of grinding tools specifically designed for surface finishing. It covers a wide spectrum of operations, from coarse machining and surface texturing to the more intricate face - down fine and shinning finishing.

 Contact us

Call us +8615067699991

Specifications Of 4 Inch Roloc Disc

Size	4”（100mm)	Brand	Keying	Code	PSD
Backing	Roloc	Origin	Made in China	Grain Type	Aluminia Oxide/Silicon Carbide/ zirconia/Ceramic
Maximum RPM	5000	Minimium Order Quantity	10000pcs	Compatible Tool	Flexible shaft drives Straight grinders Angle grinders Cordless angle grinders
Hole Pattern	No holes	Standard of Packing	100pcs

Note: Table for hole and shape OEM

4" as example, other sizes please contact sales beibei.liu@kytools.cn

Features Of 4 Inch Roloc Disc

Suitable for Different Machining Degrees
Versatile in Surface Grinding
High - Efficiency Grinding and Polishing
Improved Surface Quality

Multiple Advantages

High Profitability from Quick Tool Changes
Great Convenience with Simple Handling
Low - Vibration Working Experience
Versatile for Surface Treatment and Quality Assurance

4 Inch Roloc Abrasive Disc Applicable Industries

Applications

Removal of rust, corrosion stains, scale, dirt, and paints.
Cleaning of weld seams
Removal of slight drawing marks and heat discolorations
Cleaning of surfaces of diverse characteristics
Clean Stainless steel surface in preparation of adhesive bonding or application of fillers.

4 Inch Roloc Abrasive Disc Applicable Industries

Recommendations For Use

Preferably for use on slow-running angle grinders.
For the best results, use at a recommended cutting speed of 30–35 m/s.

Matching Tool Drives

Flexible shaft drive
Power drill
Straight grinder

Safety Instructions of 4 Inch Roloc Abrasive Disc

Instructions:

Please try to choose an operation indoor environment and wear protective guards and goggles.
Never exceed the recommended maximum permitted rotational speed for safety reasons.
In order to have a good stock removal rate, quality of surface, and thermal laoding on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.

Safety Warning:

The clamping length between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.