Name: 4 Inch Roloc Surface Condition Disc
Brand: Wenling Keying Abrasives Co., Ltd.

4 Inch Roloc Surface Condition Disc

KEYING manufactures Surface Condition Material (SCM),our production is about reprocessing jumbo rolls of SCM, then finally changing into unique smaller sizes SCM grinding and polishing tools. 4 inch flapper disc is adaptable to contours; the performance capacity is good and steady.

 Contact us

Call us +8615067699991

Specifications of 4" Roloc Surface Condition Disc

Size	4" (100mm)	Brand	Keying	Code	SDS67+4"+Grit+AO
Backing	Fibre Disc	Origin	Made In China	Grain Type	Aluminia Oxide/Silicon Carbide/Zirconia/Ceramic
Maximum RPM	4600-5300	Minimium Order Quantity	1000pcs	Compatible Tool	Flexible Shaft Drives Straight Grinders Angle Grinders Cordless Angle Grinders
Hole Pattern	No Holes	Standard Of Packing	10pcs

Table of 4" Roloc Surface Condition Disc

Table of 4

Features of 4" Roloc Surface Condition Disc Disc

Excellent and consistent finish over a long period of time
Suitable for general use in dry and wet sanding applications
Low-stretch belt
More durable so more resistant on edges
Much less smearing tendency than existing products; especially at the edge of the disc when working at tight angle

Advantages

"Excellent performance on hard materials.

More durable so more resistant on edges.

Considerably more resistant to smearing than existing products

Excellent and consistent finish over a long period of time

Suitable for general use in dry and wet sanding applications

Low-stretch belt"

4" Roloc Surface Condition Disc Disc Applicable Industries

Heavy Duty Application

Roughing

Surface fabricating

Cleaning

Step-by-step fine grinding

Surface Can Be Used on

Mrtal

Wood

Paintwork

Plastic

Matching Tool Drivessanderssanders

Sanders

Safety Instructions of 4" Roloc Surface Condition Disc Disc

How To 4" Roloc Surface Condition Disc Disc

Instructions:

Safety Instructions of 4" Roloc Surface Condition Disc Disc

Please try to choose operation indoors environment and wear protective guards and goggles.
Never to exceed the recommanded maximum permitted rotational speed for safety reasons.
In order to have a gppd syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.

Safety Warning:

The clamping lenght between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.