4 Inch (100mm) Paint & Striper Disc With Central Hole

Name: 4 Inch (100mm) Paint & Striper Disc With Central Hole
Brand: Wenling Keying Abrasives Co., Ltd.

4 Inch Paint & Striper Disc With Central Hole-图1.jpg

4 Inch Paint & Striper Disc With Central Hole-图2.jpg

4 Inch Paint & Striper Disc With Central Hole-图3.jpg

KEYING Paint & Striper Disc With Central Hole surrounds the grains with a resin body and is bonded to the fiber mesh.At the same time of high-speed grinding, the wear-resistant fiber mesh polishes and smooths the slip marks left on the surface of the object,not only the coating is removed. The layer, which also polishes the surface of the object, is undamaged and is more suitable for sanding thin metals.

 Contact us

Call us +8615067699991

Specifications of Paint Stripe Disc With Central Hole

Application	·Removing Rust And Paint ·Cleaning After Primer Filling	Brand	KEYING	Commodity Code	HG
Compatible Tool	Angle Grinder Straight Grinder	Country Of Origin	China	Raw Material	Silicon Carbide（Black） Aluminium Oxide（Purple And Blue）
Backing	Nonwoven	For Use On	Can Be Used On Nearly All Materials	Grade	Extra Coarse
Maximum RPM	5100-10000	Lifetime	Very Long	Standard Pack Quantity	10pcs

Table of Paint Stripe Disc With Central Hole

Note: Table for hole and shape OEM

4" as example, other sizes please contact sales beibei.liu@kytools.cn

Features of Paint & Striper Disc With Central Hole

Accessible in Tight Spaces
High Load and Heat Resistance
Aggressive Cutting with Good Finish
Uniform Wear and Smear Resistance

4" Paint & Striper Disc With Central Hole Applicable Industries

Heavy Duty Application

Roughing

Surface fabricating

Cleaning

Step-by-step fine grinding

Surface Can Be Used on

Mrtal

Wood

Paintwork

Plastic

Matching Tool Drivessanders

Sanders

Safety Instructions of 4" Rust & Striper One Hole

How To 4" Rust & Striper One Hole

Instructions:

Safety Instructions of 4" Rust & Striper One Hole

Please try to choose operation indoors environment and wear protective guards and goggles.
Never to exceed the recommanded maximum permitted rotational speed for safety reasons.
In order to have a gppd syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.

Safety Warning:

The clamping lenght between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.