Name: Flap Wheel 2 Inch
Brand: Wenling Keying Abrasives Co., Ltd.

Flap Wheel 2 Inch



The mounted flap wheel is a versatile abrasive tool designed to work efficiently on a wide range of materials, including ferrous and non-ferrous metals, plastics, composites, and more. It is perfect for removing rust, paint, burrs,etc.

 Contact us

Call us +8615067699991

Table of Flap Wheel 2 Inch Size

Flap Wheel 2 Inch Specification:

Diameter: 2 inch=50mm
Max. RPM: 18000~20000 RPM
Raw Materials: Aluminum Oxide(AO), Silicon Carbide(SC), Zirconia(ZR), Ceramic Aluminum Oxide Combined (CAO)
Grit Size: 40#~1200#
Shank Diameter: 3mm/6mm/3.175mm/6.35mm/8mm/10mm (Other sizes can be customized)

Flap Wheel 2 Inch Materials that can be Worked:

Ferrous Metals
Stainless Steel
Non-Ferrous Metals
Iron
Brass
Aluminum
Copper
Wood
Stone
Fiberglass
Rubber

Flap Wheels with Shank

Mounted flap wheels are versatile abrasive tools designed for precision grinding, deburring, and polishing. They are ideal for small or hard-to-reach areas, such as inner holes, edges, and complex surfaces. The flexible abrasive flaps conform to irregular shapes, ensuring an even finish with minimal material removal. These wheels are commonly used in metalworking, woodworking, and automotive industries.

Advantages：

Easy to use in hard-to-reach areas
Durable backing for long service life
Flat front faces for straightforward work
High flexibility for ideal contour adaptation
Consistent material removal throughout its lifespan

Flap Wheel 2 Inch Applicable Industries

Applicable Industries

Metalworking
Woodworking
Plastics
Glass
Stone Processing
Automotive Industry
Aerospace Industry

Application Purpose

Trimming uneven surface
Grinding furniture
Clean up welds
Stripping of old layers of paint
Deburring and Levelling
Polishing side surface

Safety Warning of Flap Wheel 2 Inch

Instructions:

Please try to choose an operation indoor environment and wear protective guards and goggles.
Never exceed the recommended maximum permitted rotational speed for safety reasons.
In order to have a good stock removal rate, quality of surface, and thermal laoding on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.

Safety Warning:

The clamping length between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.