Name: Paint Stripe Disc With Central Hole 4 Inch
Brand: Wenling Keying Abrasives Co., Ltd.

Paint Stripe Disc With Central Hole 4 Inch

Paint Stripe Disc With Central Hole 4 inch is used for coarse cleaning work such as removing paint, scale, heat discoloration, rust and adhesive residues in peripheral grinding.

KEYING Striper Discs exhibit a higher stock removal rate with a very long tool life.

 Contact us

Call us +8615067699991

Specifications of Paint Stripe Disc With Central Hole 4 inch

Size	4" (100mm)	Brand	Keying	Code	HGHG02210013+Grit+S
Backing	No	Origin	Made In China	Grain Type	Aluminia Oxide/Silicon Carbide
Maximum RPM	7500	Minimium Order Quantity	10000pcs	Compatible Tool	Flexible Shaft Drives Straight Grinders Angle Grinders Cordless Angle Grinders
Hole Pattern	One Hole	Standard Of Packing	10pcs

Table of Paint Stripe Disc With Central Hole 4 inch

Features of Paint Stripe Disc With Central Hole 4 inch

Grinding disc removes rust, scale, and old paint from metal
Multi-use abrasive works on metal, wood, fiberboard and plastics
Flexible non-woven nylon fiber disc will not rust or splinter
Coarse silicon carbide abrasive cuts fast to save time

Paint Stripe Disc With Central Hole 4 Inch Applicable Industries

Applications

Removal of rust, corrosion stains, scale, dirt, paints.
Cleaning of weld seams
Removal of slight drawing marks and heat discolorations
Cleaning of surfaces of diverse characteristics
Clean Stainless steel surface in preparation of adhesive bonding or application of fillers.

Paint Stripe Disc With Central Hole 4 Inch Applicable Industries

Recommendations for Use:

Preferably for use on slow-running angle grinders.
For the best results, use at a recommended cutting speed of 30–35 m/s.

Matching Tool Drives:

Flexible shaft drive
Power drill
Straight grinder

Safety Instructions of Paint Stripe Disc With Central Hole 4 Inch

How To Paint Stripe Disc With Central Hole 4 Inch

Instructions:

Safety Instructions of Paint Stripe Disc With Central Hole 4 Inch

Please try to choose operation indoors environment and wear protective guards and goggles.
Never to exceed the recommanded maximum permitted rotational speed for safety reasons.
In order to have a gppd syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.

Safety Warning:

The clamping lenght between shank and grinders should be more than 15mm.

Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.