English 
日本語 
한국어 
français 
Español 
italiano 
português 
العربية 
Türkçe 
беларускі 
Indonesia CLOSE
CLOSE
Search
This non-standard custom Mounted Flap Wheel is a Straight Hole Type, common specifications have an 8mm hole and 10mm hole. This one is an M8 Straight Hole Flap Wheel, and the middle of the Flap Wheel adopts imported high-quality special glue. Due to the different use and particularity of the workpiece in industrial processing, the conventional type of Mounted Flap Wheel can not be satisfied, so we support sample processing and map processing. In order to improve the application ability of movable handle page wheel in processing, customized for customers.
Max. RPM: 25000 RPM
Center Hole Diameter: 8mm
Raw Materials: Aluminum Oxide(AO), Silicon Carbide(SC), Zirconia(ZR), Ceramic Aluminum Oxide Combined (CAO)
Grit Size: 60#~600#
Flap wheels with Shank is suitable for grinding small area, dead angle, inner hole surface, and slit gaps that are difficult to reach. The Features of the abrasive clothes are various with multipurpose application capacity. It is flexible and rich in tensile strength. It could remove the burr and uneven, rough surface with fast grinding force efficiently, meanwhile, can make sure the performance result achieves a slightly finer surface. It is a good product for pre-painting or mirror finishing preparation procedures.
High flexibility to optimum adaptation to contours
Steadily high stock removal through the entire tool life and aggressive coated abrasive resin is freed up constantly
The design of opening spaces and flat bonded make the abrasive tools can process a face-down position, so can touch closely to the edges and corners.
■ Chemical processing industries
■ Building
■ Steelworks
■ Tool and mold processing
■ Pipeline
■ Shipping Building
■ Automotive industry
■ Aerospace, gas turbine treatment and repair
■ Machine engineering
■ Leveling
■ Deburring and Welding grinding
■ Structuring Surfaces
■ Step-by-step fine grinding
Please try to choose an operating indoor environment and wear protective guards and goggles.
Never to exceed the recommended maximum permitted rotational speed for safety reasons.
In order to have a good syocl removal rate, quality of surface, and thermal laoding on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.
The clamping length between shank and grinders should be more than 15mm.
Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.
「INVITATION」KEYING ABRASIVES invites you to meet in 2024 China International Hardware Show
Find more
Keying Abrasives in 2023 Zhengzhou International A&G EXPO
Find more
Keying Abrasive Flap Wheel Warranty and Guarantee
Find more
Find more
Keying Abrasives
High-quality abrasive products, customized solutions for your needs!
Contact us
Telephone
+8615067699991
address
No. 7 Songshan Road, Wenxi Industrial District, Wenling City, Zhejiang Province, China
