Grit Size
AC , C, M, F, VF, UF, SUF
Raw Material
Non woven fabrics imported fromEurope---aluminum oxide.
The KEYING Non-woven Flap Wheel (with Abrasive) consists of multiple longitudinal pleats with emery cloth in between. This flap construction helps improve stock removal and achieve a rougher surface finish. Compared with Non-woven Flap Wheel (Full), the non woven polishing wheel cloth in the middle helps to improve the cutting ability.
Grit Size
AC , C, M, F, VF, UF, SUF
Raw Material
Non woven fabrics imported fromEurope---aluminum oxide.
Reducing wear and thermal load of the workpiece can be achieved by reducing contact pressure and speed (abrasive paste/oil can be used when appropriate)
In order to avoid unnecessary tool wear and thermal load, choose to switch to coarser-grit abrasive clothes instead of increasing contact pressure to increase cutting force
Increasing the cutting speed achieves a slightly finer surface.
Increasing the contact pressure makes the surface slightly more coarse and if you use the same grit size on soft or hard material the surface finish will look coarse on the softer material.
With high elasticity, good synchronous consumption, suitable for a variety of plane, curved surface and corner polishing.
「INVITATION」KEYING ABRASIVES invites you to meet in 2024 China International Hardware Show
Find more
Keying Abrasives in 2023 Zhengzhou International A&G EXPO
Find more
Keying Abrasive Flap Wheel Warranty and Guarantee
Find more
Find more